Comparison of the transverse cranial base dimension in different craniofacial skeletal relationships: A cone-beam computed tomography study.

Background/purpose: In comparing the cranial base's size, most cephalometric studies focused on the length and angle in the anteroposterior direction. However, investigating the anterior, middle, and posterior cranial base's transverse dimensions is challenging. This study aimed to investigate the transverse dimensions of the cranial base in different craniofacial skeletal patterns and sexes using cone-beam computed tomography (CBCT). Materials and methods: A total of 210 adults (105 males and 105 females), including three different skeletal relationships, were included in the study. The cranial base dimensions were measured on a three-dimensional image structure rendered by CBCT. Statistical methods included the Kappa statistic for analysis of consistency and reproducibility and the independent t-test for differences in cranial base dimensions between sexes. A general linear model (GLM) was used to compare the transverse size of the cranial base among skeletal Class I, II, and III groups. The Pearson correlation coefficient explored the correlation among the cranial base dimensions. Results: The cranial base dimensions did not differ significantly between skeletal Class I, II, and III. The more prominent cranial base size was found in males than females, except for the crista galli length (CGL) and cribriform ethmoid plate width (CEPW). The cranial base dimensions did not differ significantly between different skeletal relationships. Most dimensions have significant correlations in the middle and the posterior cranial base. Conclusion: The cranial base's transverse dimensions in Taiwanese adults show no significant differences between craniofacial skeletal relationships. In the middle and posterior cranial base, transverse measurements reveal significant sexual dimorphism.

Condylar and ramus volume in asymmetric and symmetric skeletal class III malocclusion: A cone-beam computed tomography study.

Background/purpose: Among the craniofacial structures, the mandible is the only bony structure with movable joints. Each part (including condyle process, coronoid process, and ramus) of mandible would interaction with the muscles and proceed different osteogenesis progress. The objective of this study was to evaluate the mandibles with symmetric and asymmetric skeletal Class III jaw relations by quantifying differences in the condyle process, coronoid process and ramus on CBCT (Cone-beam computer tomography) images. Our hypothesis was that CBCT would reveal no voluminal differences between deviated and non-deviated mandibular segments in asymmetric skeletal Class III. Materials and methods: CBCT imagines were collected from dental department, KMUH and then divided into symmetric Class III group (Menton deviation < 4mm) and asymmetric Class III group (Menton deviation≧4mm). The mandibular structure would be segmented to ramus, condylar and coronoid process. Each volume was measured. Independent t test was used for comparison between groups, and paired t test was applied for comparison between both segmented parts within each group. Results: Significant differences between deviation and non-deviation sides in the asymmetric group were found in condylar and ramus segments for volumetric quantitative measurements. There has no significant difference in ramus parts between groups. Significant greater condylar volume was found in non-deviation side of asymmetric group. Conclusion: The results demonstrated that in the side with greater mandible growth potential, the condylar and the ramus volume would be greater as well. CBCT is a useful and accurate modality for quantification and evaluation of mandibular asymmetry.

Methodology for In Situ Microsensor Profiling of Hydrogen, pH, Oxidation-Reduction Potential, and Electric Potential throughout Three-Dimensional Porous Cathodes of (Bio)Electrochemical Systems.

We developed a technique based on the use of microsensors to measure pH and H2 gradients during microbial electrosynthesis. The use of 3D electrodes in (bio)electrochemical systems likely results in the occurrence of gradients from the bulk conditions into the electrode. Since these gradients, e.g., with respect to pH and reactant/product concentrations determine the performance of the electrode, it is essential to be able to accurately measure them. Apart from these parameters, also local oxidation-reduction potential and electric field potential were determined in the electrolyte and throughout the 3D porous electrodes. Key was the realization that the presence of an electric field disturbed the measurements obtained by the potentiometric type of microsensor. To overcome the interference on the pH measure, a method was validated where the signal was corrected for the local electric field measured with the electric potential microsensor. The developed method provides a useful tool for studies about electrode design, reactor engineering, measuring gradients in electroactive biofilms, and flow dynamics in and around 3D porous electrodes of (bio)electrochemical systems.

Safety Assessment of Lactiplantibacillus plantarum TWK10 Based on Whole-Genome Sequencing, Phenotypic, and Oral Toxicity Analysis.

Lactiplantibacillus plantarum TWK10 (TWK10), isolated from Taiwanese pickled cabbage, has been demonstrated to exert beneficial probiotic effects in both mice and humans. Here, we comprehensively assessed the safety of TWK10 using both in vivo and in vitro approaches, including whole-genome sequence analysis, an assessment of hemolytic activity, and performing an antimicrobial susceptibility test, the Ames bacterial reverse mutation assay, the chromosomal aberration test, a rodent peripheral blood micronucleus test, and the 28-day subacute oral toxicity assay. The results showed that there was no significant increase in the incidence of reverse mutations or chromosomal aberrations following exposure to TWK10. Moreover, no significant changes were detected either in the number of reticulocytes or the incidence of micronuclei in ICR mice, and no subacute toxicity was recorded in SD rats at the oral TWK10 dosage of 2000 mg/kg body weight/day repeated for 28 days. Additionally, TWK10 exhibited no hemolytic activity and was susceptible to all the antibiotics tested, except kanamycin. However, no antimicrobial resistance genes, virulence factors, or genes involved in biogenic amine synthesis were found in the genome of TWK10. Our findings demonstrated that TWK10 has high potential of being safe for human consumption as a probiotic.

Integration of aprotic CO2 reduction to oxalate at a Pb catalyst into a GDE flow cell configuration.

Electrochemical CO2 reduction to oxalic acid in aprotic solvents could be a potential pathway to produce carbon-neutral oxalic acid. One of the challenges in aprotic CO2 reduction are the limited achievable current densities under standard conditions, despite the increased CO2 solubility compared to aqueous applications. The application of aprotic solvents can reduce CO2 rather selectively to oxalate, and faradaic efficiencies (FEs) of up to 80% were achieved in this study with a Pb catalyst in acetonitrile, the FE being mainly dictated by the local CO2 concentration at the electrode. This process was integrated into a flow cell employing a two-layered carbon-free lead (Pb) gas diffusion electrode (GDE) and a sacrificial zinc (Zn) anode. With the application of this GDE the applicable current densities could be improved up to a current density of j = 80 mA cm-2 at a FE(oxalate) = 53%, which is within the range of the highest j reported in the literature. In addition, we provide an explanation for the deactivation mechanism of metal catalysts observed in the aprotic CO2 reduction literature. The deactivation is not related to a mass transport limitation but to cathodic corrosion observed at highly negative potential when employing quaternary ammonium supporting electrolyte cations, promoting catalyst leaching.

Pharmacophore-based virtual screening for the identification of the novel Src inhibitor SJG-136 against lung cancer cell growth and motility.

Aberrant elevated Src activity is related to lung cancer growth and metastasis. Therefore, the development of potent small molecule inhibitors to target Src kinase is a potential therapeutic strategy for lung cancer. This study aimed to develop a computational model for the in silico screening of Src inhibitors and then assess the suppressive effect of candidate compounds on cellular functions. A 3D-quantitative structure-activity relationship (QSAR) pharmacophore model consisting of two hydrogen bond acceptors and two hydrophobic regions was constructed by using 28 structurally diverse compounds with IC50 values spanning four orders of magnitude. A National Cancer Institute (NCI) compound dataset was employed for virtual screening by applying the pharmacophore model and molecular docking. Candidate compounds were chosen from the top 20% of scored hits. Among these compounds, the suppressive effects of 30 compounds available in the NCI on Src phosphorylation were validated by using an enzyme-linked immunosorbent assay. Among these compounds, SJG-136, a pyrrolobenzodiazepine dimer, showed a significant inhibitory effect against Src activity in a dose-dependent manner. Further investigations showed that SJG-136 can inhibit lung cancer cell proliferation, clonogenicity, invasion and migration in vitro and tumour growth in vivo. Furthermore, SJG-136 also had an inhibitory effect on Src-related signaling pathways, including the FAK, paxillin, p130Cas, PI3K, AKT, and MEK pathways. In conclusion, we have established a pharmacophore-based virtual screening approach to identify novel Src inhibitors that can inhibit lung cancer cell growth and motility through suppressing Src-related pathways. These findings may contribute to the development of targeted drugs for lung cancer treatment, such as lead compounds.

Improvements in Left Ventricular Diastolic Mechanics After Parachute Device Implantation in Patients With Ischemia Heart Failure: A Cardiac Computerized Tomographic Study.

BACKGROUND: Percutaneous ventricular restoration therapy with the use of a left ventricle (LV)-partitioning Parachute device has emerged as a clinical treatment option for LV apical aneurysm after extensive anterior myocardial infarction (AMI). We assessed changes of diastolic mechanics and functional improvements following LV Parachute device implantation by means of cardiac computerized tomography (CCT). METHODS AND RESULTS: CCT data were obtained from 28 patients before and after LV Parachute device implantation. Diastolic functional indices were determined by means of quantitative CCT assessment: 1) transmitral velocities in early (E) and late (A) diastole and ratio (E/A); 2) early diastolic mitral septal tissue velocity (Ea) and E/Ea; and 3) vortex formation time (VFT). Functional improvements were assessed with the use of New York Heart Association (NYHA) functional classification. Among the study patients, there were no significant differences in all transmitral velocities and E/A, though there was significantly increased Ea, reduced E/Ea, and greater VFT 6 months after LV Parachute device implantation. Finally, the improvement of diastolic functional indices after Parachute treatment correlated with observed clinical functional alterations (Δ E/Ea and Δ NYHA functional class:, r = 0.563; P = .002; Δ VFT and Δ NYHA functional class: r = -0.507; P = .006). CONCLUSIONS: LV Parachute device implantation therapy in heart failure caused by AMI and LV apical aneurysm formation showed improvements in several diastolic functional mechanics according to CCT-based measures.

21 Gb/s after 100 km OFDM long-reach PON transmission using a cost-effective electro-absorption modulator.

We experimentally demonstrate a superior performance of 2.1-Tb/s·km OFDM signal transmission over 100-km long-reach PONs. While the bandwidth of a 100-km SMF transmission system is limited to 4.3 GHz due to positive chirp, we successfully achieve spectrally-efficient 21-Gb/s signaling by using a cost-effective and low-chirp EAM, and adopting the 128-QAM format and adaptive subcarrier pre-emphasis.